Automatic Transmission Fluid Refill Tool Kit with 15PCS Adapters for Audi, Mercedes, VW, Ford, BMW, Infiniti, Nissan, Volkswagen

From the brand ADAFIRST, we are committed to providing safe and high-quality automotive tools. ADAFIRST specializes in producing professional automotive tools, dedicated to furnishing customers with safe and high-quality products. Each of our products undergoes rigorous quality control procedures before leaving the factory. If you have any questions about our products or services, please let us know, and we will give you a satisfactory reply.

Sincerely, thank you for your support to ADAFIRST!

PROFESSIONAL TOOLS

Transmission oil is mainly used for cleaning, lubrication, heat dissipation, sealing, and hydraulic transmission, which is of great significance to vehicles. It ensures the gearbox works well at low temperature and prolongs the life of the transmission device. It is necessary to replace the transmission fluid regularly at the frequency recommended by the manufacturer to avoid reducing the engine life. Or when there is poor acceleration, sudden increase of engine speed, or abnormal noise of the gearbox, it is time to check and pay attention to the maintenance of the gearbox.

SET INCLUDES: - Fluid Transfer Tool Kit - Manual Fluid Changing Pump Unit x 1 - Hand Crank for Pump x 1 - ATF Adapters x 15 - Custom-made Toolbox, 10-1/2 x 8-1/2 x 2-1/4 inches x 1 - Dual Head Screw Driver x 1 - Wrench (8MM/10MM) x 1

APPLICATION FOR 15PCS ATF ADAPTERS: ATF101 (1/8"-27) Fits Ford ATF102 Fits universal BMW, Nissan, Honda, etc. ATF103 Fits Audi, VW, Skoda ATF104 Fits Porsche, VW, Audi ATF105 (M10 x 1) Fits VW, Mini Cooper, Audi ATF106 (M24 x 1.5) Fits Audi, VW DSG ATF107 (M22 x 1.5) Fits Audi, VW CVT ATF108 (M18 x 1.5) Fits Skoda, VW ATF109 (M12 x 1.5) Fits ALTIS 2010 BENZ 722.9 ATF110 (M30 x 1.5) Fits Skoda, Audi, VW ATF111 (Universal Flexible 300mm) Fits Honda, Kia, Hyundai, etc. ATF112 (M8 x 1) Fits Nissan, Infiniti ATF113 (M18 x 1.5) Fits Toyota, Lexus ATF114 (5/16"-24UNF) Fits VOLVO ATF115 for Universal Usage (Flexible Hose)

INSTRUCTIONS: 1. Park the vehicle in a dry and ventilated place away from fire sources, set "neutral" or "parking", and step on the parking brake. 2. Start the engine to normal operating temperature, and then shut down the engine. 3. Lift the vehicle by car jack. Unscrew the drain plug on the transmission pan, drain old oil by gravity and recover it. 4. Pour the same amount of new oil into the oil can, depending on how much the old oil was emitted. Put the lid on tightly. 5. Select a right ATF adapter and insert it into the quick coupler, close the fluid control valve. Connect the adapter to the fill plug and close the drain plug on the transmission pan. Or connect the adapter to the drain plug if you need to fill the transmission fluid from this side. 6. Open the fluid control valve, press the hand crank up and down to add new ATF fluid into the transmission until the desired level (Each stroke provides about 70ml). And then follow the vehicle operating instruction to check the transmission fluid level. 7. Use clean solvent or engine degreaser to rinse out the oil can and pour it out to waste liquid tank. Allow it to dry thoroughly.

PLEASE NOTE: 1. Please operate under the guidance of professionals and wear protective glasses and gloves at all times. 2. Fluid temperature range: -3°F ~ 140°F. 3. Do not extract the oil over the limited line to prevent any spilling and leaking. 4. If you have some appropriate adapters which can connect to the quick coupler, this transmission filling pump can also be used for manual filling of other oils, such as engine oil, lubricating oil, power steering oil, and other non-corrosive and low concentration liquids.

product information: