Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit with Car, Truck, Motorcycle Accessories

From the brand JIFETOR, a professional brand of auto maintenance tools, the product quality is guaranteed and the after-sales service is satisfactory. This brake bleeder kit is used for changing brake and clutch oil, as well as sucking out old oil and air from the brake system on motorcycles, cars, trucks, pickups, and many other models. It is very suitable for the daily renewal of brake fluid and brake fluid supplement after brake system maintenance. This pneumatic operating tool saves worry and effort.

The waste oil extractor bottle is a 1-liter bottle with a cap assembly, equipped with 1/4-inch American and European air plugs to connect to a large air compressor. The ergonomic trigger with a locker allows you to free your hands when operating. The 1.8-meter-long transparent hose is good for monitoring the working situation easily, with a universal black tapered nipple for connecting the caliper bleeder valve threads.

The automatic brake oil refill device has a long screw fitting on the cap of the 0.8-liter refill bottle, which can work with the master cylinder adapter to snap onto the mouth of the vehicle's brake fluid reservoir without hand support. Fully open the valve on the long screw, and the fluid will flow out and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. However, if 0.8 liters is not enough, remember to add new oil in time.

The brake system bleeding tool kit includes 4 master cylinder adapters for most vehicle models, ranging from 21 to 30 millimeters, 24 to 32 millimeters, 28 to 37 millimeters, and 32 to 41 millimeters. The adapters can be screwed onto the brass screw of the new oil refill bottle cap and help to clamp the new oil bottle on the master cylinder, requiring no manual support.

The one-person operation design makes this tool easy to use. Fix a suitable master cylinder adapter on the long brass screw, add a proper amount of new brake fluid to the new oil refill bottle, and then buckle it upside down on the master cylinder. Connect the brake oil extractor to the brake caliper and your large compressor (more than 4 cubic feet per minute). Turn on the compressor, and the negative pressure generated in the braking system will suck out the waste fluid and air, and guide the new oil to fill the whole brake system. The refill bottle can be held on the brake fluid reservoir by the master cylinder adapter, and the hanger on the 1-liter waste oil extractor bottle can hook on the wheel, as well as the trigger locker, which is helpful for hands-free operation. You do not need to tread the brake pedal again and again when using this brake and clutch bleed tool.

product information: